GREEN Laser: Direct marking integrated laser marking system - mark highly reflective materials and sensitive plastic materials.
- COLD GREEN LASER MARKING
Cold laser marking refers to marking and treatment carried out with minimal thermal stress. Laser beam concentration allows marking without generating heat into parts, avoiding any burning or damage. This permanent marking doesn’t alter the material and is an ideal solution for marking soft materials and sensitive components.
- INDUSTRIAL LASER MICRO MARKING
Gravotech has developed green laser engravers that guarantee small and fine markings, it offers a fine spot size of 20 μm and micro markings with exceptional resolution while limiting thermal stress on the material. Small 2D Datamatrix, detailed logo, precise removal of thin layers of coating: the GREEN Series Integrated Laser can meet all of your application challenges like steel marking.
- DIRECT MARKING THE IMPOSSIBLE
Its versatility is almost unrivaled. This range uses a 532 nm wavelength to mark materials that would not normally react to infrared wavelengths: from rough to the most transparent plastics, steel marking, reflective metals (copper, silver, gold), ceramic, cardboard, wood.
Technical Specifications
Laser source
DPSS (Diode Pump Solid State) source
Available power range
5W, perfectly suited for contrasting marking on plastic
High absorption rates in materials that don’t react well with IR wavelengths
Some plastic materials (colored plastics, acrylic and polymer materials) and materials that reflect IR light such as gold and copper.
Laser classification
Class 4 Laser system, optional Class 1 workstations or Mini inline module.
Monobloc design, easy integration
No sensitive cable connections in system integration.
Thanks to its integrated HMI display, it provides access to self-diagnostic, updates, history of faults, maintenance functions and simplifies the implementation in all positions and visualization of tasks for the operator.
Highly communicative laser
Green laser markers compatible with a wide range of communication protocols:
- Ethernet TCP/ IP,
- RS232,
- Standard 8 I / 80,
- Dedicated I/O via DB-37
and optional industrial communication protocols like Profinet & Ethernet IP.
Robust laser system
- Working temperature up to 104°F, 40°C
- Built-in and washable filter for air cooling, protection against scratches and deposits.
General
Wavelength
532 nm
Power range
5W
Marking Capacity
Process automation
Industrial Ethernet Networks
Safety Performance Level e
Embedded intelligence
Autonomous
Programmable by PLC
No PC required
Traceability Management
All electrical devices use plastic with specific properties:
Insulating properties, not to conduct electricity.
Fire resistance, through the use of special flame retardant additives, temperature Resistance.
These technical plastics with additives do not react to standard IR laser (1064 nm). GREEN laser marking works perfectly and offers a contrasted marking to replace inkjet and label solutions. You can use it for the CE & normative marking, technical specifications, pins & terminal references, etc.
This GREEN laser marker saves time and money as it requires no consumables and is a high-productivity, eco-friendly solution.
The GREEN series laser reacts perfectly with precious metals such as gold & silver, as well as other highly reflective materials such as copper, stainless steel, and brass. The very high absorption rate of 532 nm wavelength gives a contrasted marking resistant to corrosion. The risk of blackening and staining is reduced by the low heat delivered by the laser beam.
You have no loss of material as the permanent laser marking is very thin and localized. It is also perfect to mark on thin metal sheets, there is no deformation due to heat from the Green laser marker. Market Examples are, Stores & Jewelry, traceability of precious metals such as gold and silver, traceability of medical devices.
Totally independent, green laser engraver works without a PC and automatically generates the data to be identified (multiple format timestamps, variables, counters, offset codes) directly on your part. Its onboard electronics make this laser an ultra-communicative solution with your environment, thus centralizing all the information from your PLCs and database in real-time and thus increasing your productivity by saving time
Lasertrace is the software dedicated to the creation of marking files and to the piloting of our marking lasers. Its simple and intuitive interface allows easy composition of your marking files, text, logo, 2D code... You can define your marking sequence according to directions, the actions (marking blocks) to be carried out, the execution procedure and the possibility of setting up a wide choice of transitions (output activations, camera blocks, variables, etc.).
The vision manager package helps you read codes and texts during and after the marking process, to ensure that the marking has been done properly and keep 100% traceability of your products. Efficiency and performance: reading camera with lighting, auto-focus system and protective lens. Easy to use: You are just a few clicks away from complete control of 1D/2D codes and your text (OCR fonts). Gradation of the marking: Quality control of the readability of the codes (Grade). Quality checking: sending status information and history to the PLC, activation of alarms, activation of the system to reject the faulty part.
This laser marker can handle more than 25 materials
| GREEN | |
|---|---|
| ORGANICS | |
| Leather | |
| Paper, Cardboard, Cork | |
| Rubber | |
| Silicon | |
| Wood, Varnished Wood | |
| PLASTICS | |
| ABS | |
| Foam | |
| PA | |
| PC | |
| PE, BET | |
| PMMA, Acrylic | |
| POM - PBT | |
| PP | |
| METAL | |
| Aluminum | |
| Anodized Aluminum | |
| Brass | |
| Carbide | |
| Coated Metal | |
| Copper | |
| Gold, Silver, Nickel, Platinum | |
| Stainless Steel | |
| Steel | |
| Titanium | |
Service & Support
We offer solutions for the installation and maintenance of your equipment that fit your settings and expectations. Do you want to be automated? We will provide you with our standard operating procedures with training videos available on our online support center. Do you wish to have our technicians present alongside your teams? We visit on-site for support with our experts working hand in hand with you.
MORE INFORMATION
Our training modules are designed to optimize the use of our solutions and are available for our full range of machines, software, and accessories and are designed to fit the level and profiles of the training participants, online, remotely, or onsite and at our training facilities. Training is a fully integrated part of the support of our solutions.
MORE INFORMATION
All our machines are guaranteed 24 months for the supply of spare parts and the cost of in-house labor performed at GRAVOTECH’s premises. We offer warranty extensions and additional service benefits according to your needs. Developed to fit your requirements, we also offer standard or customized service contracts, Global service contract, Software service contract, and a Preventive or curative maintenance contract. Our local technical sales representative is available to provide you with all the necessary information.
MORE INFORMATION
We bring support in more than 50 countries, where we have an established presence and with our distribution partners. Each of these local teams can, in turn, get support from a regional center close to our production locations and connect with our group international support center based in France, in close connection to our R&D center. This makes us efficient and reactive to your needs for assistance. With the expertise of our support, we can address 80% of your requests remotely, for a quick resolution that secures the continued service of your operations.
MORE INFORMATION
Thanks to experience gathered with Gravograph and Technifor and our global presence in more than 50 countries with 150 Gravotech technicians and our distributors, we can offer you a wide range of services. Developed to fit your requirements, we offer standard or customized services, Global service contract, Software service contract, and a Preventive or curative maintenance contract.
MORE INFORMATION